AAC files

AAC to Text & AAC Translator

Drop in an AAC file as it is — no converting first. Get the words back as text and subtitles, or translate the speech into another language.

01 Upload

Your audio

Audio and text outputText only — timestamped transcript with no audio in results.
Server assistOff by default. When on, this job uploads your media file so our servers can decode it (helpful on phones). Uploads this file (max 500 MB). Same credit cost as a normal run. Max length still 2 hours.

By default the audio file stays in this browser (only processed audio chunks go to the cloud). Default is auto-detect across 100 languages; pick a spoken language to pin it, or one of 21 languages to translate.

02 Result

Your transcript

Your timestamped transcript will appear here.

Waiting for upload

105 languages available

About AAC files

AAC is a compressed audio codec; a raw .aac file is common from broadcast tools, some recorders and audio extracted from videos.

Common sources: audio extracted from MP4s, broadcast and radio tools, some dash-cam and body-cam exports.

Browsers read raw AAC (ADTS) files.

AAC to text

If you already have the original video, you can use it directly instead — the audio is extracted for you.

30-minute AAC

A radio producer transcribes a 30-minute AAC segment to prepare a web article.

Cost: 150 credits (15¢).

Translating an AAC

The translated voice comes back as M4A, which holds the same AAC audio in a more widely supported container.

10-minute AAC

A community broadcaster translates a 10-minute AAC news segment into Arabic audio.

Cost: 1,200 credits ($1.20) with a translated voice, or 50 credits (5¢) for translated text only. Switch Full translation output on in the tool above for a voice track.

A bare .aac file versus an .m4a

AAC is the codec inside most MP4 videos and M4A files. A file ending in .aac usually holds the same sound with no container around it, in a stream format called ADTS: a sequence of small frames, each with its own header, and no index at the front. That is why .aac files turn up when audio is captured from a live stream or radio feed, when a recorder app writes frames as it goes, or when someone copies the sound out of a video with "ffmpeg -i video.mp4 -vn -c:a copy audio.aac".

The missing index has one visible effect: players have to estimate the length. In our tests a 60-second ADTS file was reported as about 66 seconds before decoding. Your browser decodes the whole file before transcription, so the timestamps in the transcript follow the real audio, not the estimate.

Where .aac files come from

Android recorder apps
Some save AAC frames directly as .aac rather than wrapping them in .m4a
Stream and radio captures
Internet radio and HLS audio are often AAC in ADTS form
Video editors and ffmpeg
"Copy the audio" exports from an MP4 produce a bare .aac
Low-bitrate voice apps
HE-AAC (AAC+), which keeps speech clear at very low bitrates, decodes the same way

Getting a good transcript from AAC

AAC holds speech well even at low bitrates, so a 64 kbps voice recording is plenty for transcription. What hurts accuracy is the content: background music under a radio presenter, phone-line audio, or two people talking at once. If a stream capture starts with a jingle or ad, trim it off first; speech recognition can invent words over music. The AAC vs MP3 article compares the two codecs at the bitrates voice recordings use.

When another tool needs MP3

Some editors and upload forms reject .aac. The free AAC to MP3 converter re-encodes it in your browser without uploading anything, and the same AAC sound wrapped as M4A plays on every Apple device. For transcription you don't need to convert: drop the .aac in directly.

40-minute radio interview captured as .aac

Transcript, timestamps and subtitles: 40 credits (4¢).

Using the tool on this page

  • The spoken language is detected automatically across about 100 languages; you can pin it, or pick one of 21 languages to translate into. Files can be up to 2 hours long.
  • Audio is sent over HTTPS in small chunks and deleted with its transcripts within 120 minutes of delivery (how files are protected).
  • You can download a timestamped transcript, subtitles (SRT and VTT) and plain text. Every output, step and limit is explained on the audio to text page.

Frequently asked questions

What's the difference between AAC and M4A?

M4A is AAC audio inside an MP4 container; .aac is the raw stream. Both work.

Can I translate an AAC file directly?

Yes — drop it into the audio workspace and choose a language.

Why does my .aac file show the wrong length?

A bare AAC stream has no index, so players estimate the duration. The file is fully decoded before transcription, so timestamps follow the real audio.

Do I need to convert AAC to MP3 before transcribing?

No. AAC is accepted directly. Convert only if another app needs MP3.

Is AAC the same as M4A?

M4A is AAC sound inside an MP4 container. A .aac file is usually the same sound without the container.